Installation; What's In The Box; Suitable Installation Position - Furrion Vision S Manual De Instrucciones

Installation

COMPLETELY READ THIS
MANUAL BEFORE INSTALLATION
NOTE: We have included all of the
items needed for most standard
installations, but all vehicles are
different. We recommend you
review your vehicle completely
before starting.

What's in the box

Make sure you have all the
following items included in the
packaging. If any item is damaged
or missing, contact your dealer.
● Camera
● Antenna x 1
● Warranty Card x 1
● Instruction Manual x 1
NOTE: The contents included may
be different based on the kit you
purchased. Please take the actual
product as standard.
Suitable Installation
Position
CAUTION
Ensure there are no electrical
cables, gas lines, pipes or other
important parts behind where the
drill holes will be.
To prevent the risk of electric shock
or fire, during installation, remove
the key from the ignition and isolate
the 12V or 24V power source.
● For optimum performance,
the camera should be
mounted where there is
minimal obstruction between
the camera and monitor.
Dense side-wall material
and electrical appliances can
reduce signal strength.
● Where practical install, as high
as possible at the rear of the
vehicle.
● Horizontal-center of the vehicle
or as close as is optimal.
14