Furrion Vision S Manual De Instrucciones página 19

Connects to
Camera
Installation
The Furrion Vision S Camera can be connected to an electrical power
source via a 7 Way Connector.
Connects to
Wiring to running lights: the camera will activate when the running
Camera
lights are switched on.
Wiring to reverse lights: the camera will activate when the vehicle
engages reverse gear.
Connects to
Camera
Consult the vehicle's service manual for specific wiring color code.
When wiring this camera directly to a 12V battery or converter in your RV,
use an in-line switch on the power cable to power on or off your camera.
This will enable this camera to be used when parked without a tow
vehicle connected.
7 WAY CONNECTION
7 WAY CONNECTION
7 WAY CONNECTION
ON/OFF
IN-LINE SWITCH
ON/OFF
Connects to
12V/ 24V
Power Supply
Connects to
12V/ 24V
Power Supply
Running,
Reverse or
Auxiliary
Connects to
Lights
12V/ 24V
Power Supply
Running,
Reverse or
Auxiliary
Lights
Running,
Reverse or
Auxiliary
Lights
DC POWER SUPPLY
18