Furrion Vision S Manual De Instrucciones página 17

Installation
3. Feed the supplied 6-foot
camera power cable through
the gasket. Ensure the bare
end of the cable goes into the
vehicle and the flat side faces
inward. (Fig. 3)
Camera Power
Bracket
Cable
Gasket
Fig. 3
4. Pull out the camera power
cable, leaving approx 2 inches
of slack. (Fig. 4)
Fig. 4
5. Install the antenna onto the
camera and rotate clockwise to
lock into place. (Fig. 5)
Fig. 5
6. Connect the camera power
cable to the camera cable.
(Fig. 6)
Fig. 6
16