Electrical Safety - Furrion Vision S Manual De Instrucciones

Important Safety Instructions
contained on a license plate.
Before using this product, it is the
buyer's responsibility to be aware
of and comply with any applicable
laws and regulations that apply to
license plates or may prohibit or
limit the use of cameras.

Electrical Safety

● A battery or 12V DC electrical
system presents a risk of
electrical shock or burn.
Ensure all power sources are
isolated before installation.
● Insulate unconnected wires
with vinyl tape or similar.
● Use insulated tools when
working with a power supply.
Caution
● There are no serviceable
parts in the Furrion Wireless
Observation Camera System.
Do not disassemble or attempt
any repairs.
● There are no fuses or
disconnects in the Furrion
Wireless Observation Camera
System. Install external fuses/
breakers as required.
Installation
● Installation and wiring of this
product require specialist
skills. To ensure proper and
safe installation, please seek a
specialist technician.
● Only use supplied or
recommended parts.
● Use watertight connectors for
the camera power supply cable
to power source.
● Connect the camera to a 12-24V
DC circuit using 18AWG or
larger cables.
● Ensure correct polarity of DC
power supply to the camera.
● To reduce the risk of fire,
connect the camera only
to a circuit provided with a
maximum branch-circuit over
current protection device.
● Do not route wiring in areas
that may get hot.
● Take necessary precautions
when working at elevated
levels.
4