Ordering Accessories; Ordering Dustbags - Philips SilentStar FC9306/02 Manual De Instrucciones

5 Fit the two lugs of the filter cover behind the ridge at the bottom
of the vacuum cleaner (1). Then push the filter cover towards the
appliance (2).
6 Press the filter cover home to lock it ('click').
Note: Make sure the filter is properly closed.
Tip: For optimal results, replace the HEPA 13 filter every 2 years. If you want
to minimise the impact on the environment, you can wash the HEPA 13 filter.
To wash the HEPA 13 filter, follow the instructions below.
1 Rinse the HEPA 13 filter under a hot slow-running tap.
Never clean the filter with a brush.
2 Carefully shake the water from the surface of the filter. Let the filter
dry completely for at least 2 hours before you put it back into the
vacuum cleaner.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
turbo brush
To clean the roller brush inside the turbo brush, follow the steps below:
1 Insert the points of a pair of scissors into the roller brush slot.
2 Move the scissors along the roller brush to catch hairs and threads
in the scissors.
3 Cut the hairs, threads etc. that have collected around the roller
brush and pull them out.
Note: Do not detach the roller brush and the parts inside the turbo brush.

ordering accessories

For purchasing dustbags, filters or other accessories for this appliance,
please visit www.philips.com, consult the worldwide guarantee leaflet or
contact the Philips Consumer Care Centre in your country.

ordering dustbags

- Philips Classic s-bag ` synthetic dustbags are available under type
number FC8021.
- Philips Clinic s-bag ` high filtration synthetic dustbags are available
under type number FC8022.
English
13