Maintenance - Philips SilentStar FC9306/02 Manual De Instrucciones

English
10
3 Put the appliance in upright position. To attach the nozzle to the
appliance, insert the ridge on the nozzle into the storage slot.
- To ensure stable parking of the telescopic tube, adjust the tube to the
shortest length.
Tip: We advise you to wrap the hose around the tube to ensure stable parking
and to save even more space when you store the appliance.

maintenance

Always unplug the appliance before you clean the appliance, before you
replace the dustbag and before you replace the filters.
Dustbag
Note: In some cases, the dustbag-full indicator can indicate that the dustbag
is full, even though it is not. This may occur if the pores of the dustbag are
clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement dust and
similar substances) or if something is blocking the nozzle, tube and/or hose.
If the pores of the dustbag are clogged, you have to replace the dustbag, even
if it is not full yet. If the dustbag is not clogged but not full either, something is
blocking the nozzle, tube and/or hose. In this case, do not replace the dustbag
but remove the obstruction.
- Replace the dustbag as soon as the dustbag-full indicator has changed
colour permanently, i.e. even when the nozzle is not placed on the
floor.
1 Pull the cover upwards to open it.
2 Lift the dustbag holder out of the appliance.
Make sure you hold the dustbag upright when you lift it out of the
appliance.