GB
4 – MAIN FEATURES
DESCRIPTION OF APPLIANCE
This booklet describes a number of appliance
models. For more detailed information about the
model in your possession, refer to "Technical
Data".
Range of sturdy shelving systems on legs,
suitable for storing materials for large distribution,
having the following characteristics:
- manufactured entirely in stainless steel (AISI 430
or AISI 304)
- 3 shelves with reinforcement, for placing on
different levels as required
- 1 shelf with reinforcement (same as others) for
placing on the first set of holes at the bottom
(starting from the feet side)
- stainless steel adjustable feet
- easy assembly
TECHNICAL DATA
DESCRIPTION
DIMENSIONS
(WxDxH mm)
SHELVING
970x450 (550)x2000
1000
SHELVING
1070x450 (550)x2000
1100
SHELVING
1170x450 (550)x2000
1200
SHELVING
1270x450 (550)x2000
1300
SHELVING
1370x450 (550)x2000
1400
SHELVING
1470x450 (550)x2000
1500
SHELVING
1570x450 (550)x2000
1600
SHELVING
1670x450 (550)x2000
1700
SHELVING
1770x450 (550)x2000
1800
SHELVING
1870x450 (550)x2000
1900
SHELVING
1970x450 (550)x2000
2000
IDENTIFICATION OF THE APPLICANCE
Your appliance model is indicated in the box
marked PNC on the identification dataplate affixed
on inside of leg.
PRECAUTIONS
Before installing or using the appliance read this
instruction booklet carefully because it contains
important information concerning safety, operation
and maintenance.
Keep this instruction booklet in a safe place for
future consultation by other users or purchasers in
the event that the appliance is resold.
Important:
Installation and maintenance of the of the
appliance must only be performed by a
qualified installer authorised by the
manufacturer.
This appliance is intended for specifically
industrial use only. Any other use of the appliance
is deemed improper.
The appliance must only be used by trained
staff.
Only contact the technical service centre
authorised by the manufacturer for repairs and
only use original spare parts. Failure to
comply with the above requirement may
compromise the safety of the appliance and
invalidate the quarantee.
WEIGHT
Do not wash the appliance with water jets.
(kg)
Do not use products containing chlorine (bleach,
27 (33)
hydrochloric acid etc.) even diluted, to clean steel
surfaces.
29 (35)
Do not use corrosive substances (e.g. muriatic
acid) to clean the floor under the appliance.
31 (37)
The manufacturer will not accept
responsability for any work carried out on
33 (39)
appliances where instructions indicated in the
manual are not heeded.
35 (41)
The current manual may not be reproduced in
any way.
37 (43)
DISPOSAL AND DEMOLITION
39 (45)
The appliance must be disposed of properly at the
end of its service life.
41 (47)
Temporary storage of special waste is permitted
but only if the final porpoise will be the definitive
43 (49)
disposal by treatment and/or final collection.
Dispose the special waste according to the law
45 (51)
regulations of your country. Keep the enviroment
clean.
47 (53)
All countries have different legislations; therefore,
the specific prescriptions enforced by the
legislation and local authorities of the country
where the appliance is demolished, must be
observed.
Generally speaking, appliances have to be
delivered to specialised collection/demolition
centres.
Disassemble the appliance and divide the
components by their nature, remembering that
6