Instructions For Installation - Whirlpool AGS 266/WP Instrucciones Para La Instalación, El Uso Y El Mantenimiento

some components can be recycled and that
appliance components can be re-used locally.
Make the appliance unusable by removing the
power supply cable and remove any compartment
locking device (when present) in order to avoid
the risk of someone being trapped inside.
The symbol "weee" on the product indicates
that this product should not be treated as
domestic waste, but must be correctly disposed of
in order to prevent possible negative
consequences for the environment and the human
health. Regarding the recycling of this
product, please contact the sales agent or dealer
of your product, your after-sales service or the
appropriate waste disposal service.
The dismantling of the appliance must be do
in any case by qualified personnel.
5 – INSTRUCTIONS FOR
INSTALLATION
PLACE OF INSTALLATION
The appliance must only be installed in
adequately ventilated premis.
REFERENCE STANDARDS
Install the appliance according to the prescriptions
of current safety standards.
In any case, this appliance was produced in
conformity of the following european directivities:
-DIRECTIVE 92/59/EEC Leg. Decree 115/95
concerning the general safety of products.
POSITIONING
Unpack the appliance and carefully remove the
protective film from the outer panels to avoid
leaving any trace of adhesive. Use a suitable
solvent to remove any adhesive residues.
Dispose of the packaging as instructed in the
chapter on "Disposal".
Refer to the installation diagrams at the beginning
of this booklet for the space requirements and
connection dimensions of the appliance.
The appliance is not suitable for built-in
installation.
Set the appliance and if neccessary adjust the
work height with the adjustables feet.
SPECIAL MAINTENANCE
Special maintenance must be carried out by
trained personnel.
Periodical check of leg-shelf fixing screws
6 – INSTRUCTIONS FOR USE
CARE AND ROUTINE MAINTENANCE
Routine maintenance operations can be carried
out by non-specialized personnel, carefully
following the instructions given below.
The manufacturer declines all liability for any
operations carried out on the appliance without
respecting these rules.
PRECAUTIONS IN CASE OF LONG IDLE
PERIODS
During long idle periods, take the following
precautions:
- Unplug the appliance
- Go over all the stainless-steel surfaces
vigorously with a cloth moistended with paraffin oil
in order to form a protective film
-Periodically air the room
7