Melita AROMA ENHANCE THERMAL Manual Del Usuario página 3

● Make sure that the voltage in your
home corresponds with the voltage
indicated on the bottom of the
appliance.
● Do not attempt to operate the
appliance if it only works
intermittently, or stops working
altogether.
● For household use only.
SAVE THESE
INSTRUCTIONS!
EXTENSION CORDS
● A short power-supply cord (or detachable
power-supply cord) is provided to reduce
risks resulting from becoming entangled
in or tripping over a longer cord.
● Longer detachable power-supply cords
or extension cords are available and may
be used if care is exercised in their use.
● If a long detachable power-supply cord or
extension cord is used:
1. The marked electrical rating of the
detachable power-supply cord
or extension cord should be at least
as great as the electrical rating
of the appliance;
2. If the appliance is of the grounded
type, the extension cord should
be a grounding type 3-wire cord; and
3. The longer cord should be arranged
so that it will not drape over
the counter top or table the top where
it can be pulled on by children
or tripped over.
POLARIZED PLUG
This appliance has a polarized plug, which
means that one blade is wider than the other.
To reduce the risk of electric shock, this plug
is designed to fit into a polarized outlet only one
way. If the plug does not fully fit into the outlet,
reverse it. If it still does not fit, contact
a qualified electrician. Do not attempt
to modify the plug.
OPERATION
1. BEFORE YOUR FIRST USE
● Remove packaging materials, labels,
and stickers from the coffee brewer.
● Wash filter basket and glass carafe with
a mild dish detergent.
● Read the BREWING INSTRUCTIONS section.
● Insert plug-cord can be length end or
shortened by using the cable storage (Fig.l).
● Clean the brewer by filling the water reservoir
with fresh, filtered, cold water to the MAX line.
● Turn on the brewer and allow the water to run
through a brew cycle.
● Let the brewer cool down for 5 minutes
before repeating the process at least 2 more
times before brewing coffee.
2. SET WATER HARDNESS
Depending on water hardness limescale may
build up in the appliance. This increases the
appliance's energy consumption as limescale
on the heating element can prevent the water
heating effectively. To avoid damage the
appliance must be descaled regularly.
The descaling display helps you in this.
If the CALC-button (11) is permanently lit this
shows that the appliance needs to be descaled.
The appliance is pre-set for a high level of water
hardness (level 4). You can find out the level
of water hardness in your area by asking your
local water provider or by using water hardness
measuring strips available in the shops.
For softer water, the descaling display can
be adjusted to descale less often.
● Hold down the CALC-button (11) and
by briefly pressing the M-button (9) set
the desired level of water hardness.
The hardness setting will then show
in the display.
● Once you have set the desired level
of water hardness, let go of the
CALC-button.
Your settings are now saved.
● The settings and display are shown
in the table.
EN
4