Publicidad
11
11
XX
RR + SS
XX
GOLD 1" MACHINE SCREW
(1 used for the BACKPLATE and PULL)
Fasten the DOOR (M) to the LEFT END (B). Slide the HINGES (QQ) onto the HINGE BRACKETS on the LEFT END. Secure the
DOOR with the mounting screw on the HINGE BRACKET. See the next step for adjustments.
Peel the FELT DISC from the FELT DISC CARD (XX). Stick a FELT DISC on the DOOR where it comes in contact with the
UPRIGHT (D).
Fasten a BACKPLATE (RR) and PULL (SS) to the DOOR (M). Use a GOLD 1" MACHINE SCREW (III).
Page 16
B
M
III
www.sauder.com/services
402375
Publicidad
