Package Contents - DeWalt DCH363 Manual De Instrucciones

Have defective cords replaced immediately
Charger problem
Battery problem
Discard the battery pack with due care for
the environment
Do not incinerate the battery pack
Charge D WALT battery packs only with
E
designated D WALT chargers. Charging
E
battery packs other than the designated
D WALT batteries with a D
E
may make them burst or lead to other
dangerous situations.

Package Contents

The package contains:
1 Cordless rotary hammerdrill
1 Side handle
1 Depth adjustment rod
1 Dust extraction system
1 Keyless chuck (DCH364)
2 Battery packs (D2, M2)
1 Battery pack (D1, M1)
1 Charger
1 Kitbox
1 Instruction manual
NOTE: Battery packs and chargers are not included
with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fi g. A, A1, D, H)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
1 Variable speed switch
2 Forward/reverse slider
3 Mode selector
4 Safety lock
5 SDS Plus
6 Locking collar
7 Dust cover
8 Depth adjustment rod
9 Side handle
10 Main handle
11 Battery pack
12 Release button
13 Charger
14 Charging indicators (red)
15 Tool holder locking sleeve
16 Keyless chuck
INTENDED USE
Your cordless rotary hammerdrills have been
WALT charger
E
designed for professional drilling, hammerdrilling and
screwdriving applications as well as for light chipping.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These heavy-duty rotary hammerdrills are professional
power tools. DO NOT let children come into
contact with the tool. Supervision is required when
inexperienced operators use this tool.
• Young children and the infirm. This appliance
is not intended for use by young children or infirm
persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
DUST EXTRACTION SYSTEM (FIG. A1)
17 Electrical pins for dust extraction system
18 Dust extraction system (D25302DH)*
19 Dust extraction system attached to rotary
hammerdrill
*The dust extraction system (D25302DH) can be
purchased separately from your nearest authorised
D WALT dealer at additional cost.
E
OVERLOAD CLUTCH
In case of jamming of a drill bit, the drive to the drill
spindle is interrupted. Because of the resulting forces,
always hold the tool with both hands and take a firm
stance.
E N G L I S H
®
tool holder
41