Selecting The Start Time - Insignia IS-HTIB102731 Manual Del Propietário

Operation
1. In stop mode, press PROGRAM on the re-
mote control unit. The program mode display
appears on the TV screen and the front panel
display.
2. Use the number buttons (0~9) to input the
track numbers in a desired order.
3. When you key in the number buttons (0~9),
press the OK button to confirm.
If you attempt to program more than 99 tracks,
"FULL" will be displayed.
4. Repeat step 3 to add more tracks to the pro-
gram list.
5. To begin program playback, press PLAY/
PAUSE ll or OK.
6. To stop playback, press STOP
7. To cancel the program, press STOP
Notes:
This function is not available when playing
DVD and MP3 discs.
To repeat playback for the programmed
tracks, press REPEAT while in the program
playback mode.
The program sequence is cancelled when
you press STOP
or turn the power off.

Selecting the Start Time

This function allows you to start playback at any
chosen time on the disc.
When playing DVD discs, press GOTO:
1. Press GOTO repeatedly, to display the
following menu on the television screen:
– Use the / buttons to go to title or chapter.
– Use the number buttons (0~9) to input the
desired title or chapter number, and press
OK to start playback from that selection.
16
once.
again.
twice, open the disc tray,
TITLE 02 / 05 CHAPTER
TITLE 02 / 05 TIME - - : - - : - -
When playing DivX discs
1. Press GOTO, the following menu appears on
the TV screen:
GOTO - - : - - : - -
2. Use the number buttons (0~9) to input the time,
and press OK to start playback from that selec-
tion, but the time you enter must be less than
the total time of the disc.
Notes:
This function is not available when playing
MP3 disc.
001 / 006