Tuner Operations
IMPORTANT!
Make sure FM and AM antennas are connected.
Tuning to Radio Stations
1. Press SOURCE to select the desired band:
"FM" or "AM".
2. Press and hold
ING +) until the frequency indication starts to
change, then release.
–
The system automatically tunes to the next
strong radio station.
When tuning to a weak station, press
(TUNING-) or
(TUNING+) briefly and repeat-
edly until an optimal reception is found.
3. Repeat step 2 if necessary until you find the
desired radio station.
Presetting Radio Stations
You can preset up to 40 stations regardless of the
reception.
1. Tune to your desired radio station (refer to
"Tuning to radio stations".
2. Press SLOW/MEMORY, the display will show
as below.
3. Use the number buttons (0~9) to select the
desired radio preset number.
4. Press SLOW/MEMORY to store the station.
5. To preset another radio station, repeat steps
1-4.
(TUNING -) or
(TUN-
Auto presetting radio stations
1. In tuner mode, press and hold "PROGRAM"
button more than 3 seconds, all radio
stations with strong signal strength will be
stored automatically.
–
The system will stop when all the available
stations are stored or the memory of 40
preset radio stations is full.
–
The first preset radio station will then be
played when storing completed.
2. Press STOP button to stop storing radio
station.
Listening to Preset Radio Stations
1
In tuner mode, press PRESET + / - (I
l) or number buttons (0~9) to select the
desired preset stations.
/
25