Sound And Volume Controls Sound Control; Selecting Surround Sound; Selecting Sound Effect; Volume Control - Insignia IS-HTIB102731 Manual Del Propietário

Sound and Volume Controls
Sound Control

Selecting Surround Sound

1. Press SURROUND to select:
Playing a DVD disc
– For a DVD disc with Dolby Digital signal, you
can select:
Stereo Dolby Digital
– For a DVD disc with DTS 5.1 signal, you can
select:
Stereo DTS
– For a DVD disc with PCM or Prologic signal,
you can select: Stereo
Playing a CD/MP3 disc or in TUNER/TV/AUX
m o d e
– You can select: Stereo
Note:
The availability of various surround sound
modes depends on the number of speakers
connected and the sound mode available for
the disc.

Selecting Sound Effect

1. Press EQ button repeatedly to cyclicity
select the preset equalizer mode: POP
ROCK JAZZ
will show as below.
26
Dolby Prologic.
Dolby Prologic.
CLASSIC. The display

Volume Control

Changing the Volume Level

You can vary the level of each speaker as follows.
At the same time, you can adjust the treble or bass
levels.
1. Press SELECT to select a channel. The level
of the channel will appear on the front panel
display and TV screen.
TREB (treble level), BASS (bass level) adjust-
able range: -10dB to +10dB, 2dB/step.
FL (front left level), CNT (center level), FR
(front right level), SR (surround right level),
SL (surround left level) and SUB (subwoofer
level) adjustable range: -15dB to +10 dB, 1dB/
step.
2. Press VOLUME - and VOLUME + to adjust
the selected channel' s level.
3. If you do not press the SELECT or VOLUME -
/ + buttons for a few seconds, the values turn
off and are stored in the system.