Function Overview Front Panel; Front Panel; Back Panel - Insignia IS-HTIB102731 Manual Del Propietário

Function Overview

Front Panel

1 STANDBY ON button
Press to turn the system to POWER ON or to
STANDBY.
2 DISC TRAY
3 ll PLAY/PAUSE button
Press to start or pause the playing disc.
4 OPEN/CLOSE button
To open or close the disc tray.
5 STOP
Press to stop the playback.
6 REV button
In disc mode, press to skip to previous track.
In tuner mode, press to select the preset
station.
7 FWD button
In disc mode, press to skip to next track.
In tuner mode, press to select the preset
station.

Back Panel

1 AC Power Cord
Connect to a standard AC outlet.
2 SPEAKERS Terminals
Connect to the front, center, rear (surround)
and subwoofer speakers.
3 AUDIO OUT jack
Connect to the analog audio inputs of an ex-
ternal recording device or amplifier.
4 AUDIO IN - (TV/AUX) jack
Connect to the analog audio outputs of a TV
or VCR.
5 COAXIAL OUT DIGITAL jack
Connect to an audio equipment with
digital(coaxial) audio input.
6
8 PROGRAM button
In disc mode, to program disc tracks.
In tuner mode, to program preset radio
station.
9 DISPLAY SCREEN
To view the current status of the system.
10 SELECT button
To select the audio channel to view its level.
11 SOURCE button
To select the relevant active mode: DVD, FM/
AM, TV/AUX or DIGITAL.
12 VOLUME +/- control button
Adjust to increase or decrease the master
volume level and speaker level.
13 HEADPHONES jack
To connect the headphone.
14 DISPLAY button
To display information on TV screen during
playback.
6 OPTICAL IN DIGTAL jack
Connect to an audio equipment with
digital(optical) audio output.
7 S - VIDEO OUT jack
Connect to a TV with S-video input.
8 VIDEO OUT jack
Connect to a TV with video input.
9 COMPONENT VIDEO OUT jack
Connect to TV with COMPONENT input.
10 AM/FM Antenna jack
Connect to the AM loop antenna and FM
antenna.