Metra 99-8161S Instrucciones De Instalación página 7

5. Place radio trim panel (with factory
door) over radio and secure to the
bracket/door assembly using the
screws supplied with the radio.
(Figure E)
Note: Top cross bar is for
shipping only please cut and
remove before assembly.
6. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
7. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
Kit Assembly
(Figure E)
99-8161S
(with factory door)
7