Descargar Imprimir esta página

Lumbar Support; Backrest Adjustment; Fore/Aft Isolator - Grammer MSG97 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
Seat functions and operation
* if fitted
** optional extra
26
L um b ar support
With the upper and lower switch the curvature
in the upper and lower area of the backrest
upholstery can be individually adjusted.
This increases both the seating comfort and
the performance of the driver.
The lumbar support curvature can be
increased pressing "+" or reduced by pressing
"–" on the relevant switch.
When the backrest upholstery does no longer
react to pressing "+", the maximum curvature
has been reached and the switch should be
released.
B ack rest adj ustm ent
Pull up the locking lever to release the
backrest catch. When releasing the backrest
catch, do not apply load to the backrest by
pressing against it.
By exerting pressure on or off the front or rear
part of the seat pan it can be moved to the
desired position. Release the locking lever to
lock the backrest.
F
It should not be possible to move the
backrest into another position after it has
been locked.
F ore/ aft isol ator
Under certain driving conditions (for example
with a trailer attached), it is useful to activate
the fore/aft isolator. This means that shock
impacts in the driving direction can be better
absorbed by the driver seat.
Position
= fore/aft isolator off
Position
= fore/aft isolator on
F
After the adjustment of position , the
locking lever must latch into the desired
position.
For that, the seat must be pressed backwards
until it latches with an audible click.
F
It should not be possible to move the
fore/aft isolator into another position when it is
locked.
GB

Publicidad

loading