4.4. Installation location/surroundings
DANGER!
Risk of electric shock!
Major changes in temperature or fluctuations in hu-
midity can cause moisture to build up within the device
due to condensation – this can cause an electrical short
circuit.
After transporting the device, wait until it has
reached ambient temperature before switching it on.
NOTICE!
Risk of damage to the device!
Unsuitable environmental conditions could cause dam-
age to the device.
Use the device only in dry rooms.
To prevent the device from falling, only install and
operate it and its components on a sturdy, level and
vibration-free surface.
When setting up the device:
– Leave a sufficient gap in relation to other objects, and that
the ventilation slots are not covered in order to ensure that
there is always sufficient ventilation
– Do not expose the device to direct sources of heat (e.g.
heaters)
– Do not leave the device in direct sunlight
– Avoid contact with moisture, droplets or splashes, and no
liquid-filled objects – for example, vases – are placed on or
near the device
– Do not place the device close to magnetic fields (e.g. televi-
sion sets or other loudspeakers)
– Do not place naked flames, such as lit candles near the de-
vice
– Ensure that the connection cable is not taut or bent.
DE
EN
FR
ES
IT
NL
47