Track Information (Id3); Bluetooth Mode; Connecting Bluetooth Devices For The First Time - Medion LIFE P64430 Manual De Instrucciones

9.17.3. A-B (loop function)
 Press the A-B button during playback to set the starting point of a section. RPT
A appears in the display.
 Press the button again to set the end point. RPT A-B appears in the display.
Playback now repeats within this section.

9.18. Track information (ID3)

If the CD or the USB memory stick contains tracks with ID3 information, you can dis-
play this information while a track is playing. You will see the track, artist and album
name on the display.
 Press the INFO button repeatedly to switch the information display on or off.

9.19. Bluetooth mode

You can use Bluetooth to play tracks wirelessly from external devices such as MP3
players or mobile phones with Bluetooth on this micro audio system.

9.19.1. Connecting Bluetooth devices for the first time

 Switch to Bluetooth mode. Enable the Bluetooth function on your external de-
vice as well.
 Press and hold the /PAIR button until PAIR appears on the display.
The micro audio system is in pairing mode.
 Perform pairing on the external device. Refer to the instructions for your external
device for more information. The name of the audio system is "MD 44300".
BT appears on the display permanently and the pairing process is now complete;
the external device can now be used with the micro audio system.
 If you want to stop data transfer via Bluetooth, switch off the Bluetooth function
on the external device or press
Known external devices, which have already been paired once, will be connected
again automatically in the future. It is not necessary to pair the devices again. To re-
connect, simply activate Bluetooth mode on both devices.
64
to switch to a different mode.