Safety Instructions - Victron energy Blue Smart IP67 12/7 Manual

Always provide proper ventilation during charging.
•
Avoid covering the charger.
•
• Never try to charge non-rechargeable - or frozen batteries.
Never place the charger on top of the battery when
•
charging.
Prevent sparks close to the battery. A battery being
•
charged could emit explosive gasses.
Battery acid is corrosive. Rinse immediately with water if
•
acid comes into contact with skin.
This appliance is not designed for use by young
•
children or people who cannot read or understand the
manual unless they are under the supervision of a
responsible person to ensure that they can use the
battery charger safely. Children should be supervised
to ensure that they do not play with the appliance
Connection to the mains supply must be in accordance
•
with the national regulations for electrical installations. In
case of a damaged supply cord please contact the
manufacturer or your service agent.
The battery terminal not connected to the chassis has to
•
be connected first. The other connection is to be made to
the chassis, remote from the battery and fuel line. The
battery charger is then to be connected to the supply
mains.
After charging, disconnect the battery charger from the
•
supply mains. Then remove the chassis connection and
then the battery connection.

Safety instructions