Tabla de contenido
Publicidad
Panel frontal
1.1 Display de cristal líquido (LCD)
1.2 ENTER: confirmación de las diferen-
tes funciones
1.3 CANCEL: cancelación de la función
seleccionada
1.4 ON/OFF: encendido/apagado
1.5
: selección de diferentes paráme-
tros
1.6 HOLD: bloqueo de la medida mostra-
da en pantalla
1.7 STD: calibración de la constante de la
célula de conductividad y del factor de
conversión TDS
1.8 CONST: ajuste de la constante de la
célula de conductividad
1.17
1.1
1.10
1.16
1.13
1.14
1.15
1.12
Pág. 4
Manual de instrucciones 50910080
CASTELLANO
1.9 COEF: ajuste del coeficiente de tem-
peratura
1.10 VIEW: visualización de datos
memorizados
1.11 SAVE: función guardar datos
1.12 DEL: función borrar datos
1.13 MODE: selección del modo de medi-
da (conductividad, TDS o salinidad)
1.14 PRINT1: impresión de datos on line.
1.15 PRINT2: impresión de datos guarda-
dos.
1.16 Porta soportes
1.17 Soporte de célula
1.18 Célula de conductividad (no inclui-
da)
1.19 Sonda temperatura
1.18
1.19
1.5
1.2
1.7
1.8
1.6
1.9
1.11
Revisión 1 Junio-07
To view the data saved in other measuring modes, press MODE (1.13) directly in the
visualization mode.
Data can be deleted in the visualization mode (see Data deleting).
Data deleting
1. Deleting all the data saved in a measuring mode
Select the desired measuring mode and press DEL (1.12).
All Cond. saved.
Delete now?
Press ENTER (1.2), all the data will be deleted automatically.
If CANCEL (1.3) is pressed, data will not be deleted and the equipment will return auto-
matically to the measuring mode.
If there are no saved data, the following message will be displayed for a few seconds
and then the equipment will return to the measuring mode.
NO Cond. saved!
2. Deleting a specific datum
Select the desired measuring mode.
Press VIEW (1.10) and the list of the saved data will be displayed.
With
(1.5), select the specific datum to be deleted.
Press DEL (1.12), Delete selected? will be displayed.
Press ENTER (1.2) and the datum will be automatically deleted.
1.3
Press CANCEL (1.3) to return to the measuring mode.
Data printing
1. Data printing on line
1.4
Connect the equipment to a TP-16 printer or a PC.
When reading is stable, press PRINT 1 (1.14) and the measured value will be printed or
transmitted to the PC.
2. Saved data printing
Connect the equipment to a TP-16 printer or a PC.
Version 1 June-07
DEL
DEL
Instruction manual 50910080
ENGLISH
Page 33
Publicidad
Tabla de contenido
