Spectroline uVision Serie Manual De Instrucciones página 2

UV emitted from this product. Avoid eye and skin exposure to unshielded products.
IMPORTANT SAFETY INSTRUCTIONS (Read all instructions)
• Do not operate the uVision™ Series UV-A/White Light LED NDT Inspection Lamp
(UV-365ZSBLC/UV-365ZHC) if the lamp has been damaged.
Do not look directly into the light. ALWAYS wear the UV-absorbing protective glasses
•
provided when operating the lamp. Use in low-light conditions to achieve the best inspection
results. The darker the room, the greater the fluorescent contrast.
• The uVision™ is not approved for use in hazardous atmospheres. Do not attempt to use it in
areas requiring explosion-proof lighting.
• Never use this equipment in any manner not specified in these instructions because your
protection may be impaired.
• NEVER aim the lamp in the direction of another human being. It is meant for professional
fluorescent inspections ONLY!
• DO NOT attempt to modify the lens assembly or light output. Doing so may alter the
performance and intensity of the uVision™.
OPERATION
• The lamp has a three-position rocker power switch (II – UV; O – off; I – white light) on
the handle.
• The uVision™ has a White Light Intensity Adjustment Controls located on the back
plate of the lamp. The Battery Indicator is also located on the back plate of the lamp.
The Battery Indicator light will be Orange when the battery is charged and the lamp is
operating within RRES compliance. When the battery is nearly depleted, the light will
flash between Red and Orange.
• The uVision™ is designed to automatically shut off if the unit operates outside of RRES
compliance standards (UV-365ZSBLC). To turn the unit back ON from a shut off event,
turn the lamp OFF and then ON using the three-position rocker switch.
• WARNING: Be sure to use genuine uVision™ replacement parts. Using another
manufacturer's replacement parts could affect product performance and will void the
warranty.
Rocker Switch
FOR PROFESSIONAL EXAMINATION USE ONLY
White Light
Intensity
Adjustment
WARNING
2
Battery
Indicator