Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
❷
Calibration failed.
a.
Calibrate the strip lights again.
b.
Ensure no other strong lights are affecting the camera.
c.
Calibration points must be chosen correctly. For example, the top calibration point on
your TV cannot be dragged to the bottom. The calibration lines cannot overlap or cross
each other.
d.
Calibration can only begin after the strip lights are successfully connected to Wi-Fi.
❸
The provided adhesives don't stick well.
a.
Wipe the installation surface to ensure it is dry and clean.
b.
When attaching the strip lights, ensure you press down firmly.
c.
Reinforce the strip lights with the provided clips or other strong adhesives.
❹
Calibration and picture upload failure
With your smartphone, check whether the Wi-Fi connection is stable.
❺
Wi-Fi connection failure
a.
Do not skip the Wi-Fi connecting step during setup. Ensure you input the correct Wi-Fi
name and password according to the app instructions.
b.
5GHz Wi-Fi is not supported. Connect the strip lights to a 2.4G Wi-Fi band then reboot
your router.
c.
With your smartphone, check whether the Wi-Fi connection is stable.
d.
The strip lights are not compatible with the Wi-Fi name or password. Please change the
Wi-Fi name and password.
e.
The strip lights are not compatible with your router. Please try to connect your strip
lights to a smartphone hotspot.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Goveeofficial
@Govee
@govee_official
08
@Govee.smarthome
Publicidad
Tabla de contenido
