KTM Power Parts 78112990000 Guia De Inicio Rapido página 8

8
- Position the roadbook holder
ed) loosely on the roadbook rack

- Mount the screws with the washers
tighten to 10 Nm.

- Route the wiring harness
- Connect the power supply cable
not included) to the vehicle wiring harness and to wiring

harness (starting with model year 2014).
Route the cable properly and secure with a cable binder.
Ensure that the cables are not kinked or pinched. Check the
cable routing to ensure that there is no chafi ng.
- Remove the left mask rubber
and mount it with the brake hose guide
- Mount the headlight mask with the screw
the left and right on the roadbook rack and tighten to 10 Nm.
Switch off the roadbook holder after operation using the pull
switch (power consumption).
Final steps
- Install the indicator lamps (up to model year 2013).
- Mount the fuel tank.
- Mount the seat.

(60012073000 not includ-

(included).

(included) and
(59012090060 not included).

(no. 77711979010

from the headlight mask

(included).

(included) on