Removing The Last Connected Device - Medion LIFE S62010 Manual De Instrucciones

6.6. Removing the last
connected device
After switching on, the earphones
automatically attempt to connect to
the last audio output device paired via
Bluetooth.
To prevent this automatic pairing, you
can remove the last connected audio
output device from the earphone
memory. To do so, proceed as follows:
 Switch off the earphones.
 Press and hold the multifunction
buttons on both earphones (R/L)
for at least 14 seconds.
The operating LEDs light up red and
blue simultaneously. Subsequently
they fl ash red and blue 2 times rapidly.
The earphone memory is now reset.
DE
EN
FR
ES
IT
NL
95