Special Safety Directions For The Device - FLORABEST FHSA 20 B1 Traducción Del Manual De Instrucciones Original

GB IE
Special Safety Directions for
the device
1) SPECIAL SAFETY DIRECTIONS
FOR HEDGE TRIMMERS
• Keep all parts of the body away
from the cutter blade. Do not
remove cut material or hold ma-
terial to be cut when blades are
moving. Make sure the switch is
off when clearing jammed ma-
terial. A moment of inattention while
operating the hedge trimmer may result
in serious personal injury.
• Carry the hedge trimmer by the
handle with the cutter blade
stopped. When transporting or
storing the hedge trimmer al-
ways fit the blade guard. Proper
handling of the hedge trimmer will re-
duce possible personal injury from the
cutter blades.
• Hold the power tool only on the
insulated handle surfaces, as
the cutting blade may come into
contact with concealed power
cables. Contact between the cutting
blade and a live cable may render me-
tallic components live and result in an
electric shock.
• Before the work, search the
hedge for concealed objects,
e.g. cable etc. In this way you avoid
damage to the appliance
• Hold the hedge trimmer cor-
rectly, e.g. with both hands on
the handles, if there are two
handles. Loss of control of the equip-
ment may result in injuries.
• Wear suitable clothing and
work clothes when working
with the equipment. Do not hold
the equipment by the cutting
28
blade or lift it on the cutting
blade. Contact with the cutting blade
can cause injuries.
2) FURTHER SAFETY DIRECTIONS
For your personal safety:
Wear suitable work clothes such as
boots with non-slip soles, sturdy
long trousers, gloves and goggles.
Do not wear long flowing clothing
or jewellery, as this may be caught
by moving parts. Do not use this
tool while walking barefooted or
while wearing open sandals.
• The appliance is designed for
trimming hedges. Do not use to
cut twigs, hard wood or other ob-
jects. This could damage the appliance.
• Do not attempt to release a
blocked/jammed blade safety
bar before turning off the pow-
er and removing the battery.
There is a risk of injury.
• When operating the appliance,
always hold it well with both
hands and at some distance
away from your body. This ena-
bles better control of the power tool in
unexpected situations.
• Do not use the tool in the vicin-
ity of flammable liquids or gas-
ses. Fire- and explosion risk exist in
the event of a short circuit.
• The blades have to be checked
for wear in regular intervals
and re-sharpened. Blunt blades
will overload the machine. Resulting
damages are not covered by warranty.
• Do not attempt to repair the
tool yourself, unless you are
schooled in this field. All works,
which are not described in