Tabla De Contenido; Safety Information - HAMPTON BAY 52389 Guía De Uso Y Mantenimiento

Ventilador de techo bennington de 1,72 m
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Table of Contents
Table of Contents ................................................................ 2
Safety Information ............................................................... 2
Warranty ............................................................................... 3
Pre-Installation .................................................................... 3
Installation ............................................................................ 6

Safety Information

1.
To reduce the risk of electric shock, ensure the electricity has
been turned off at the circuit breaker or fuse box before you
begin.
2.
All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70-1999 and local electrical codes. Electrical
installation should be performed by a qualified licensed
electrician.
3.
The outlet box and support structure must be securely mounted
and capable of reliably supporting 35 lbs. (15.9 kg). Use only
UL Listed outlet boxes marked "Acceptable for Fan Support of
35 lbs. (15.9 kg) or less."
4.
The fan must be mounted with a minimum of 7 ft (2 m) clearance
from the trailing edge of the blades to the floor.
5.
Do not wait for the fan to stop to press the reverse button. The
fan will not reverse if the fan is not moving.
6.
Do not place objects in the path of the blades.
7.
To avoid personal injury or damage to the fan and other items,
use caution when working around or cleaning the fan.
8.
Electrical diagrams are for reference only. Light kits that are
not packed with the fan must be UL-listed and marked suitable
for use with the model fan you are installing. Switches must be
UL General Use Switches. Refer to the instructions packaged
with the light kits and switches for proper assembly.
9.
After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the
outlet box.
10.
All setscrews must be checked and retightened where
necessary before installation.
Assembly .............................................................................. 7
Operation ........................................................................... 12
Care and Cleaning ............................................................. 13
Troubleshooting ................................................................. 13
WARNING: To reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
flanges) during assembly or after installation. Do not
insert objects in the path of the blades.
WARNING: To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.
WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
WARNING: To reduce the risk of fire, electric shock
or personal injury, mount to outlet box marked
"Acceptable for fan support of 35lbs. (15.9 Kg) or
less", and use screws provided with the outlet box.
WARNING: Electrical diagrams are for reference
only. Optional use of any light kit must be UL-listed
and marked suitable for use with this fan.
WARNING: To reduce the risk of fire or electric
shock, this fan should only be used with fan speed
control part no. UC7067RYK, manufactured by Rhine
Electric Co., LTD.
CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.
CAUTION: Remove the two cardboard shipping
pads securing the motor hub in the motor housing
assembly.
2

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

523815238852-bnt581-696581-699581-702

Tabla de contenido