A Insulation housing
B Crumb tray
C Cord storage
D Toaster lever
E Browning knob
BEFORE USING FOR THE FIRST TIME
Ensure you read the safety instructions before first use and keep to hand with the
product instructions.
Remove all packaging, stickers and various accessories from both the inside and outside
of the toaster.
Adjust the cord length by winding it under the base. Wedge the cord into the notch (Fig.1).
Plug in the toaster.
Put the toaster on once or twice on the maximum level to eliminate the smell of newness.
This operation must be carried out when it is empty (without bread) in a ventilated room.
NEVER leave the appliance unattended whilst in operation
Place the slices of bread in the toaster (Fig. 2).
Do not insert slices which are too big or too thick: the slice must not get stuck in the slot.
Select the desired toasting level (Fig. 3).
Choose between 8 different toasting levels by selecting the desired level:
Position 1 = lightly toasted
Position 8 = well toasted
The intensity of the toasting increases with the figures on the dial. For wholemeal bread,
put the control dial on a longer toasting time than for white bread. Put the control dial on
a figure lower than if, for example, you wish to toast just one slice of bread.
Important:
Pieces of dry bread or those which have already been toasted, brown more quickly
and may even burn. You are advised to choose a lower toasting level for this type
of bread and to not let the toaster operate without supervision.
Press down the start lever until it is automatically locked (Fig. 4).
The toaster starts working and the STOP button lights up. The lever only operates if the
toaster is turned on.
The bread is automatically ejected and the toaster stops once the previously selected
toasting level has been reached (Fig. 5).
Remove the bread. You can use the start lever by moving it back to the top. This function
makes it easier to remove the bread.
To interrupt toasting, press the STOP button (Fig. 6).
Caution:
If a piece of bread is blocked in the toaster, unplug it immediately, let it cool down for
a few minutes and then gently release the bread, without touching the hot elements.
DESCRIPTION
F DEFROST function
G REHEAT function
H STOP button
I BAGEL function
DIRECTIONS FOR USE
1