Before The First Use; Use - Krups F286 Manual Del Usuario

• Automatic ejection of the grill to make it
easier to monitor cooking and retrieve
dishes.
• A fold down crumb tray making it easy to
collect breadcrumbs and other materials.
• A tray on which you can make small cakes,
sandwiches, frozen dishes.
• A broiler for healthier cooking.

Before the first use

• Remove the grill, tray and broiler, wash them
in hot soapy water, rinse them and dry them
carefully.
Switch your appliance on without any
food in it and with the door open, to
remove the " new " smell:
• Press the "select" button and choose the
"bake" function (oven). The corresponding
light will come on.
• Press the "display select" button and choose
the "°F" function (temperature). The
corresponding light will come on.
The display will show 500°F.
• Press the "start" button and wait for about
15 minutes.
You will see that some light smoke may come
out of the oven. This is normal and it will
gradually disappear during this first use.
• Switch the appliance off by pressing on the
"stop" button.

Use

Every time that you press a button, your oven
will make a confirmation beep.
If you wait for more than 30 seconds before
pressing on the "start/ stop" button between
two settings, the appliance will cancel the
new setting and return to clock mode.
. S
ETTING THE CLOCK
• Press the "display select" button and choose
the "clock" function. The light will come
on.
• Press the " " button to increase the time,
8
or press the " " button to reduce it, and
program it. Press and hold either of the keys
to change the time quickly.
• Once you have set the clock, press the
"start" button to start it. You will see two
dots flashing in the display.
. S
ETTING THE TIMER
The "timer" function can only be set in the
"broil" and "bake" functions. Times are pre-
programmed in the "toast" function, without
you being able to modify them.
To set the timer:
• Select a "broil" or "bake" function using
the "select" button.
• Press the "display select" button and choose
the "timer" function.
The light will come on.
A pre-programmed cooking time appears in
the display, either 15' in "broil" mode or 30'
in "bake" mode.
• Press the " " button to increase or the " "
button to reduce this time. The time is
increased or reduced in increments of 1
minute.
• Once you have selected the time, press
"start" and the countdown begins. You will
hear five beeps when the time has run out
and the display will return to clock mode.
The appliance will switch itself off.
Note:
• The maximum programming time of the
timer in "broil" mode is 45 minutes.
• The maximum programming time of the
timer in "bake" mode is 1 hour 30 minutes.
• You can also use the timer alone, without it
being associated with a baking function in
your oven. In this case :
. press the "display select" button alone and
choose "timer".
The light will come on and the display will
show (0.01)
. proceed as described above to increase or
reduce this time and press the "start"
button to start the countdown.