SANUS VuePoint FLT1 Guia De Instalacion página 12

Ocultar thumbs Ver también para FLT1:
Tabla de contenido

Publicidad

STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
Mount wall plate
07
Minimum solid concrete thickness: 8 in. (203 mm)
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
Minimum horizontal space between fasteners: 16 in. (406 mm)
1
Min.
16 in. (406 mm)
NOTE: During operation, your TV
shifts 2.28 in. (58 mm) when retracted
or extended. The wall plate and TV
brackets have built-in adjustments to
help fine-tune your TV placement.
Level the wall plate template
12
directly onto concrete surface (no wall covering)
RETRACTED
EXTENDED
2.28 in. (58 mm)
and tape in place.
06
Solid Concrete or Concrete Block Installation
2
06
3 in. (75 mm)
3/8 in.
(10 mm)
Drill pilot holes into solid concrete. Never drill into the mortar
BETWEEN blocks.
IMPORTANT:
3 in. (75 mm), using a 3/8 in. (10 mm) diameter drill bit.
Concrete Install Kit #CMK1 is not included
(see page 7) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
Pilot holes must be drilled to a depth of
06

Publicidad

Tabla de contenido
loading

Tabla de contenido