bosal 010-278 Manual De Instrucciones página 4

6.
Draw end of bunch with , grey/yellow,
a) Disconnect 6-input side joint from standing lights and connect with suitable joint in electric bunch. Connect
remaining joint of electric bunch to standing lights.
7.
Draw remaining end of bunch with 6-input joints to left standing lights:
a) Disconnect 6-input side joint from standing lights and connect with suitable joint in electric bunch. Connect
remaining joint of electric bunch to standing lights.
8. Connect
metal screw; do not secure the hole with anti-corrosion remedy).
9. Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue,
functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the follo-
wing parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
green and grey/red cables to right standing lights:
(e.g. drill a 3mm diameter hole, and connect and fix the eyelet terminal with
part no. 014-169
part no. 015-069
) is provided for expanded socket