Kreg Micro-Pocket KPHA730 El Manual Del Propietario página 5

Operation – Drilling Your First Pocket
Hole
1
Determine the Material Thickness and Set the
Stop Collar
a. Use the material thickness gauge (C) to determine the material thickness
range.
b. Set the stop collar (D) by placing it on the drill bit (B) and aligning
the window of the stop collar (D) with the material thickness range
determined in step a.
c. Use the hex wrench (C) to lock the stop collar (D) into place on the drill
bit (B).
D
B
C
5