Pairing Guide - Toyota BLU LOGIC Manual Del Usuario

Pairing your phone is simple, just
follow these steps:
The system can pair up to 7 hand-sets.
For a list of compatible phones please
go to http://www.blulogicupdate.com
1. Place your hand-set near the dash
board no more than 3 feet/1 meter apart.
2. Press and hold key down for 8
seconds (approximately) until you hear
3 short beeps (this puts the system into
pairing mode for 5 minutes).
3. Activate your mobile hand-set's
Hands-free accessing function by refer-
ring to your mobile hand-set user guide
for details. The hand-set will search for
accessible Hands-free devices.
Note:
For most phones, the pairing operation
will be as follows:
Search for a
Handfree search. This will vary
depending on the features of your par-
ticular phone.
6

Pairing Guide

new deviceNew
4. To pair another phone, repeat steps
1 through 3.
Pairing Order:

1
2