Getting Started; Sensor Installation; Sensor Setup - BALDR B0389WST2H2 Manual De Usuario

BALDR recommends high quality alkaline or lithium batteries
for the best product performance. Heavy duty or rechargeable
batteries are not recommended.
MAIN UNIT INSTALLATION
1. Remove the battery compartment cover.
2. Insert 3x AAA batteries matching the polarity(+and-)
3. Replace the battery cover

SENSOR INSTALLATION

1. Remove the battery compartment cover
2. Insert 2xAA batteries matching the polarity（+and-)
3. Replace the battery cover

SENSOR SETUP

● Power the main unit prior to load the battery of sensor
● Switch the Channel 1 -2- 3 of the senor to any channel you want.
For example, you can set to Channel 1 for the sensor. But please
ensure the main unit are set to the same channel before
synchronization. (Special note: Press."
unit to set the channel.The setting order is CH1--CH2--CH3--
Channel scan（from CH1 to CH2 to CH3,8 seconds intervals）,
you must select the same number choices for both the sensor and
the main unit in order to synchronize)

Getting Started

9
'' button on the main
/CH