Urmet Miro Manual Del Usuario página 9

WALL SURFACE MOUNTING
Remove the plastic base from the door phone unit and fi x the base to the wall as shown in the drawing here
below (you may want to use the drilling template supplied at the end of this manual).
Connect.
Fix the door phone to its plastic base.
TERMINAL PINS DESCRIPTION
GT Button common terminals
Y1 Button
X1 Button
}
S-
Supplementary ringer
S+
]
Floor call
CP
]
LINE System bus connection
DS1183-013A
n° 2 screws and screw
anchors included
1
and
9