Before First Use; Operation - oneConcept 10030530 Manual Del Usuario

• Read all instructions in this manual carefully. The information included in this manual
will guide you through the versatility of your Pizza Oven.
• Place your Pizza Oven on a level surface such as a countertop or table. Be sure the
sides, back and top of the Pizza Oven are at least four inches away from any walls,
cabinets or objects on the counter or table. Remove all stickers from the Pizza Oven.
Remove Round rack, Pizza plate or Food tray, and wash them in warm, soapy water or
in the dishwasher. Dry thoroughly before placing them into the Pizza Oven.
•
• When you are ready to use the Pizza Oven, be sure that the Timer Control is at „Off "
position and unplugged. We recommend a trial run to familiarize yourself with your
Pizza Oven and to eliminate any protective substance or oil that may have been used
for packing and shipping. Plug the cord into a (110-volt or) 220-volt AC outlet (ac-
cording to the voltage standard of your country). Set the Timer Control to „20" min-
utes. A small amount of smoke and odor may be detected, it is normal.
• To avoid scratching, marring, discouloration or fi re hazard, do not store anything on
the top of the Pizza Oven, especially during operation.
Caution : Danger of scalding
Appliance surfaces are hot during and after use! Do not place anything on top
of this appliance. Always wear protective, insulated oven mitts when handling,
inserting or removing items from the hot pizza oven.
Using Your Pizza Oven for Pizza
With Round rack (Note : the small steel bar round shelves)and Pizza plate (Note : the
round aluminium plate with hole) can quickly roast pizza, cake or cookies. The thickness
of the roasted food should not exceed 3.5cm.
1. Insert the sharp-side of the "S" square shaft of the Round rack into the square hole
of motor connector of the Base station, the "S" square shaft should be moved to the
range of the inner cavity of the Pizza oven so that people can easily put the Pizza plate
16

Before First Use

Operation