Installation Conditions, Installation And Assembly; Scope Of Supply - Graf ANAEROBIX 107883 Instruccion Para La Instalacion

1.
The installation of the tank will be carried out in accordance with the installation instructions attached to the
tank. In addition, the installation conditions for the relevant tank described therein are to be observed.
Art. No. 107883 ANAEROBIX
Anaerobic Filter 30 L

Filter housing with carrier material in net bags

1 x lip seal DN 100
Art. Nr. 107600 ANAEROBIX
Anaerobic Filter 60 L for Carat S septic tanks

Filter housing with carrier material in net bags

2 x lip seals DN 100

2 x Spax screws
For installation of the intake and discharge pipes a Ø 124 mm core drill is required (Art. No. 202003). This
can be purchased separately from Otto Graf GmbH.

Installation conditions, installation and assembly

2.

Scope of supply

mail@graf.info
www.graf.info
Art. No. 107884 ANAEROBIX
Anaerobic Filter 40 L

Filter housing with carrier material in net bags

1 x lip seal DN 100
Art. No. 107601 ANAEROBIX
Anaerobic Filter 60 L for Carat S septic tanks
including accessories

Filter housing with carrier material in net bags

2 x lip seals DN 100

2 x Spax screws

Tube of lubricant

Pipe DN 100, length 1000 mm as outlet pipe

Pipe DN 100, length 1500 mm as standpipe
10 / 32