Remote controller
Precaution:
The Remote Controller will not function properly if strong light strikes the sensor window of the
air conditioner or if there are obstacles between the Remote Controller and the air conditioner.
Model: CW-XC83HU
OPERATION
1
TEMP
AIR
TIMER
SWING
3
MODE
FAN SPEED
2
ECONOMY
6
OPERATION
• To turn the air conditioner ON, push the button. To
turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on
the High cool mode and the temp. at 72°F(22˚C).
MODE
• Every time you push this button, it will toggle
between COOL, FAN and DRY.
ON/OFF TIMER
- STOPPING OPERATION
• Every time you push this button, when the air
conditioner is operating, timer is set as follows.
(1Hour
2Hours
3Hours
6Hours
7Hours
8Hours
10Hours
11Hours
12Hours
• The Setting Temperature will be raised by
2°F(1°C) 30min. later and by 2°F(1°C) after
another 30 min.
- STARTING OPERATION
• Every time you push this button, when the air
conditioner is not operating, timer is set as follows.
(1Hour
2Hours
3Hours
6Hours
7Hours
8Hours
10Hours
11Hours
12Hours
Model: CW-XC63HU, CW-XC63HK
CW-XC83GU, CW-XC83HK
OPERATION
1
TEMP
5
TIMER
3
7
MODE
FAN SPEED
4
2
ECONOMY
6
4Hours
5Hours
9Hours
O)
4Hours
5Hours
9Hours
O)
7
Model: CW-XC78HU
1
5
3
4
2
FAN SPEED
• Every time you push this button it is set as follows.
{High(F3)
Low(F1)
Med(F2)
TEMPERATURE SETTING
• This button can automatically control the
temperature of the room.
The temperature can be set within a range of 60°F
to 86°F by 1°F.(16˚C to 30˚C by 1˚C) Select the
lower number for lower temperature of the room.
ECONOMY
• If the switch is set to "On", the fan stops when the
compressor stops cooling. Approximately every 3
minutes the fan will turn on and check the room air
to determine if cooling is needed.
AIR SWING
• This button can automatically control the air flow
direction.
OPERATION
TEMP
5
TIMER
MODE
FAN SPEED
4
High(F3)...}.