Troubleshooting - Uline SHOP-VAC H-5011 Manual Del Usuario

ISSUE
Parts/accessories missing.
Vacuum cleaner will not start.
Dust discharging from exhaust.
Loss of suction.
Static shock.
PAGE 9 OF 27

TROUBLESHOOTING

POSSIBLE CAUSE(S)
1. Packed in tank
1. No power at receptacle
2. Defective switch
3. Defective motor
1. Filter not installed or installed improperly
2. Filter damaged
3. Filter clogged or dust is too fine
4. Filter not functional
1. Loose hose connection
2. Filter clogged
3. Full tank
4. Hole in hose
1. Dry environment
2. Relative humidity of air is low
1-800-295-5510
uline.com
CORRECTIVE ACTION
1. Check in tank
1. Check for power
2. Replace switch
3. Replace motor
1. Properly install filter
2. Replace filter
3. Use more efficient filter
4. Clean and replace filter
1. Tighten hose connection
2. Clean or replace filter
3. Empty tank
4. Replace hose
1. Add moisture to air (if practical, use a
console or installed humidifier)
2. This situation is temporary and does not
affect the use of the vacuum cleaner
0521 IH-5011