ABB ACQ580 Manual Del Usuario página 5

Refer to the motor or pump nameplate for the following nominal value settings of the motor.
Enter the values exactly as shown on the motor or pump nameplate.
Example of a nameplate of an induction (asynchronous) motor:
ABB Motors
3
motor M2AA 200 MLA 4
IEC 200 M/L 55
Hz kW
V
690 Y 30
50
400 D 50
30
660 Y
50
30
380 D 30
50
50
415 D 30
35
440 D 60
Cat. no
3GAA 202 001 - ADA
6312/C3
Check that the motor data is correct. Values are
predefined on the basis of drive power, but you
should verify that they correspond to the motor.
Start with the motor type. Go to the edit view of a
selected row by pressing
• Scroll the view with
Motor nominal cosΦ and nominal torque are
optional.
Press (Next) to continue.
Adjust the limits according to your needs.
• Go to the edit view of a selected row by
pressing .
• Scroll the view with
Go to the next view by pressing
If you want to make a backup of the settings made
so far, select Backup and press
If you do not want to make a backup, select Not
now and press
Note: The control panel has space for one
automatic backup. Drive creates an automatic
backup two hours after the last parameter change.
The panel checks for additional parameter
changes at intervals of 24 hours. The new backup
will overwrite the previous backup only when the
last change has passed two hours.
No
Ins.cl. F
IP 55
IA/IN t E/s
r/min A
cos
1475 32.5 0.83
1475 56 0.83
1470 34 0.83
1470 59 0.83
1475 54 0.83
59 0.83
1770
6210/C3 180
IEC 34-1
.
and .
and .
(Next).
(Next).
(Next).
EN – Quick start-up guide 5
R0-
R4
EN
DE
ES
FR
IT
RU
SV