Maintenance & Care - Bissell 2003 Serie Guía De Usuario

Empty Dirty Water Tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from
charger before performing maintenance or troubleshooting.
1
Ensure the unit is OFF and set upright
on a flat surface. Simply push up on the
release button located on the top of the
tank to remove.
3
Rinse out the dirty tank with clean water
after emptying.
NOTICE: To reduce the risk of a leaking condition, do not store where freezing
may occur. Damage to internal components may result.
10
www.BISSELL.com
2
Carefully remove the dirty water tank from
the unit and carry to a sink. To prevent
spills, hold tank vertically after removing.
To empty, pull tab at the end of the tank
and empty to remove the dirty water.
4
Close the tank plug
and return tank to
the unit. Ensure
the tank is secure
before use.
click