Sensitivity; Sensitivity Levels And Indications; Eco Max Mode - Philips AVENT SCD565 Manual Del Usuario

Note:
D
The arrow on the display indicates in which
direction you can navigate.
Press the OK button to confirm your selection.
3
Note:
D
Press the MENU button if you want to leave the
menu without making any changes. If there is no
input in the menu for more than 20 seconds,
the menu closes automatically.

7.2 Sensitivity

This option in the parent unit menu allows you to
set the microphone sensitivity on the baby unit.
The microphone sensitivity determines what noise
level the baby unit picks up, e.g. you will want to
hear when your baby cries, but you may be less
interested in its babbling.
Select 'Sensitivity' in the menu with the + and
1
- buttons and press OK to confirm.
Use the + and - buttons to increase or
2
decrease the microphone sensitivity.
The sensitivity indication on the display has
four segments.
• If all four segments are filled, the sensitivity
is at its highest level.
• If all segments are empty, the sensitivity is
at its lowest.
14
Press OK to confirm the setting.
3

7.2.1 Sensitivity levels and indications

Icon Sensitivity Description
highest Hear everything from your
baby. The speaker of the
parent unit is continuously on.
high Hear all sounds from soft
babbling and louder. If your baby
does not make any sound, the
speaker of the parent unit is off.
medium Hear sounds from soft cries
and louder. If your baby makes
softer sounds, the speaker of
the parent unit does not go on.
low The speaker of the parent
unit only goes on if the
baby makes loud sounds, for
instance because it is crying.

7.3 Eco Max mode

This baby monitor has a built-in Smart Eco mode that
automatically reduces the DECT signal from the baby
unit as the distance between parent unit and baby
unit becomes shorter. By reducing radio transmission,
it helps to save energy. If you want to save even more
energy and to stop radio transmission, activate the
Eco Max mode in the menu of the parent unit. In this
mode, the DECT signal of the baby unit is switched
off. As soon as the baby makes a sound, the DECT
signal of the baby unit automatically switches on again.
Caution:
C
In Eco Max mode, the parent unit receives feedback
from the baby unit with a delay. When your baby
makes a sound, the baby unit first has to reactivate
radio transmission before it can send feedback to
the parent unit.