RECARO C 6000 Manual De Montaje página 43

Warning:
The screws in the kit are micro-encapsulated and should never to be used more than once.
The micro-encapsulation will become ineffective if they are repeatedly used and the permanent
securing of the screw connection can no longer be guaranteed.
Important note:
Ensure that neither the cable nor the hose can be trapped or damaged when the seat rails are
moved forwards or backwards.
H
5. Fit the shortened hose/cable harness to the RECARO seat. Connect up the pneumatic (1) and the
electrical (2) connectors.
6. Use the end clip (3) to secure the hose/cable harness to the air spring-cap
Warning:
You must ensure that the hose/cable harness does not get caught up, damaged or become
subjected to tension or pressure during the remainder of the installation, as the correct functioning
of the controls cannot be guaranteed otherwise.
RECARO Automotive Seating
1 2
3
R0203
1 Pneumatic connector
2 Electrical connector
3 End clip
Seite 18