Installing Handle; Removing Handle - RIDGID MOB16000 Manual Del Usuario

SP7012 Ridgid MOB16000 ESF.qxp_SP7012 12/20/16 3:33 PM Page 7
Drum/Base assembly (continued)
5. Insert the caster stem into the socket
of the power base as shown. (Front
caster only).
6. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will be able to hear the
ball snap into the socket and the
caster will swivel easily when
positioning is correct.
access Door
Access door located on the lid of the Vac
provides the user a way of discarding
larger items that may block or may not fit
through the hose very well, such as a
beverage can or block of wood.

installing handle

Press and hold release buttons while
installing handle into handle receptacles
in drum (See illustration).
note: An audible snap of release
buttons indicates successful engagement
of handle.

removing handle

Press and hold release buttons as
shown. While firmly pushing in release
buttons, pull handle upwards to remove
(see illustration).
Caster Stem
Caster Ball
Socket
Metal
Handle
Release
Buttons (2)
Handle
7
Receptacles (2)
Access
Door
Lid