Brita Redi-Twist RFS - 301 Instrucciones De Instalación página 9

Filter Replacement
(every 6 months)
1/4 turn
For FREE Filter Replacement
Reminder, go to
www.protectplus.com
Note: Place paper towels or rag under the filter
system to catch any water drips.
• Turn the Redi-Twist™ filter right to
left until it releases. Remove and
discard used filter.
• Flush the filter with running water for
approximately 10 minutes. See step 4
for details.
• See page 8 for inserting new filter.
• Note date filter is installed on
cartridge tank label.
System
RFS-301 Redi-Twist™
Refrigerator/Icemaker Filter System
Replace filters every six months or when capacity
is reached.
Replacement Parts Part Number
WFBAS-300
RFS-301 installation instructions
Use and Care
Brita Redi-Twist Filtration System RFS-301
® ™
Usage and quality of water in your incoming
water line affect the life of filter cartridges.
Cartridges should be replaced sooner if
water pressure begins to drop noticeably or
if the filter fails to perform satisfactorily.
Changing water filter on a regular
basis ensures optimum performance
of the water filtration system.
After prolonged periods of non-use, it
is recommended that the filter system
be flushed thoroughly. Let water run
for 10 minutes before using.
The Redi-Twist
TM
filter system has a limited service
life. Changes in taste, odor, and/or flow
of the water being filtered indicate that
the filter should be replaced.
Please see the Performance Data Sheet
for the certified performance of specific
systems with stated cartridges.
Filter Model Number
RFF-201 - Level 3 filter
Capacity: 500 gallons (1,893 liters)
Flow Rate: 0.5 gpm (1.9 lpm)
Operating pressure 30-125 psi (207-862 kPa)
Description
Mounting Screws (Package of 2)
filter used with this
Version 1.0D
9 9