Maintenance And Storage - Worx WG430E Traducción De Las Instrucciones Originales

9) Do not tamper with the power source
governor settings; the governor controls
the safe maximum operating speed and
protects the power source and all moving
parts from damage caused by over-speed.
Seek authorized service if a problem exists.
10) Do not transport this machine while the
power source is running.
11) Shut off the power source and disconnect
the plug whenever you leave the work
area.
12) Do not tilt the machine while the power
source is running.
mAInTEnAnCE AnD
STORAGE
1) When the machine is stopped for servicing,
inspection ,or storage, or to change an
accessory, shut off the power source,
disconnect from supply, make sure that
all moving parts have come to a complete
stop and, where a key is fitted remove
the key. Allow the machine to cool before
making any inspections, adjustments, etc.
2) If the supply cord is damaged it must be
replaced by a service agent or a similarly
8 8
qualified person in order to avoid hazard.
aDDITIONaL SaFETY INSTrucTIONS
FOr uNITS wITh BaggINg
aTTachmENTS
Shut-off the power unit before attaching or
removing the bag.
Leaf mulcher
SymBOLS
Read instruction handbook before
operation this machine
Keep bystanders away
Remove plug from the mains
immediately if the cable is
damaged or cut.
Wear eye and ear protection
Do not use in the rain or leave out-
doors while it is raining.
Danger – Rotating blades.
Keep hands and feet out of open-
ings while machine is running.
Double insulation
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
Local Authority or retailer for
recycling advice.
En