Sauder 416511 Manual De Instrucciones página 21

Step 17
Carefully stand your unit upright.
å
Fasten a DOOR (H) to the RIGHT HINGE MOLDING (U).
å
Use the screws in the HINGES. See the next step for door
adjustments.
NOTE: You may need to loosen the mounting screw and
å
adjusting screw to slide them part way out of the slot. Retighten
the screw before you mount the HINGE to the MOLDING.
Fasten a KNOB (42K) to the DOOR (H). Use a BLACK 7/8"
å
MACHINE SCREW (37S).
Peel two FELT DISC from the FELT DISC CARD (1M) and
å
stick them on the DOOR (H) where they come in contact
with the UPRIGHT (C).
Repeat this step for the other DOOR (H).
å
www.sauder.com/services
Mounting screw
U
C
416511
Pro Tip: Lift with your
legs. And, you know,
your arms.
Adjusting screw
42K
H
1M
37S
BLACK 7/8" MACHINE SCREW
(2 used in this step)
Page 21