Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (7F) into the large holes in the ENDS (A and
B). Repeat this step for the BOTTOM (F)
(8 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
7F
B
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=947
to watch a video on how to assemble your unit.
A
416511
Page 5
Publicidad
