Connecting To Separately Sold Power Amp - Pioneer DVH-P5050MP Manual De Instalación

Connecting the Units

Connecting to separately sold power amp

Rear audio output
(Refer to pages 8 – 11.)
Antenna jack
(Refer to page 4.)
6 En
This product
IP-BUS input (Blue)
(Refer to page 4.)
When you connect separately sold multi-channel
processor (DEQ-P7050) to this unit, do not connect
anything to the speaker leads and system remote
control (blue/white).
Note
When you connect DEQ-P7050 to this unit, separately
sold power amp must be connected to DEQ-P7050.
Note
Change the initial setting of this product (refer to the
Operation Manual). The subwoofer output of this unit
is monaural.
15 cm
Front output
(FRONT OUTPUT)
15 cm
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
Optical input
System remote control