Tabla De Contenido; Safety Information; Symbols; Work Area Safety - Husky HDUFL50 Guía De Uso Y Mantenimiento

Table of Contents
Table of contents-------------------------------------------------2
Safety information------------------------------------------------3
Symbols-------------------------------------------------------3
Work area safety----------------------------------------------3
Personal safety-----------------------------------------------3
Tool use and care---------------------------------------------4
Tool service----------------------------------------------------5
Air source------------------------------------------------------5
Operation------------------------------------------------------5
Air supply and connections----------------------------------5
Loading the tool-----------------------------------------------6
Warranty-----------------------------------------------------------6
Unpacking---------------------------------------------------------7
Specifications-----------------------------------------------------7
Features-----------------------------------------------------------8
Operation ---------------------------------------------------------8
Loading cleat nails--------------------------------------------8
Loading staples-----------------------------------------------8
Unloading cleat nails and staples---------------------------9
Changing the foot plate -------------------------------------9
Clearing jams -------------------------------------------------9
Setting the air pressure-------------------------------------10
Operating the tool-------------------------------------------10
Maintenance-----------------------------------------------------11
Anti-dust cap-------------------------------------------------11
Lubrication---------------------------------------------------11
Cleaning------------------------------------------------------12
Cold weather operation------------------------------------12
Recommended hookup----------------------------------------13
Troubleshooting-------------------------------------------------14
2

Safety Information

WARNING: To avoid serious personal injury, do not
attempt to use this product until you read the manual
thoroughly and understand it completely. Save this
manual and review frequently for continuing safe
operation and instructing others who may use this
tool.
WARNING: When using tools, basic precautions
should always be followed, including the following.

SYMBOLS

Read operator's manual To reduce the risk of injury, :
user must read and understand operator's manual
before using this product.
Risk to hearing Always wear ear protection when :
using this tool Failure to do so may result in .
hearing loss .
Eye protection Always wear safety goggles, safety :
glasses with side shields or a full face shield when ,
operating this product .
Risk of serious personal injury Never place hands :
or any other body parts in the fastener discharge
area of the nailer the tool might eject a fastener ,
and could result in death or serious personal injury

WORK AREA SAFETY

1. Keep the work area clean and well lighted. Cluttered
benches and dark areas increase the risks of accidents.
2. Do not operate the tool in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
The tool creates a spark which may ignite flammable
liquids, gases or dust.
Keep bystanders, children, and others away while
3.
operating the tool. Distractions could result in improper
use and cause injury.
4. Avoid unintentional misfires. Always use caution to avoid
accidentally firing. Do not point towards yourself or
anyone whether it contains fasteners or not.

PERSONAL SAFETY

WARNING: Instructions pertaining to a risk of fire,
electric shock, or injury to persons.
WARNING: This product or its power cord may contain
chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
Wash hands after handling.
1. Do not nail on top of another nail. This can cause
deflected and hit someone, or cause the tool to react and
result in a risk of injury to persons.
2. Always wear eye protection. Operator and others in
the work area should always wear ANSI-approved
safety goggles with side shields. Eye protection is
used to guard against flying fasteners and debris,
which may cause severe eye injury.
3. Always wear hearing protection when using the tool.
Prolonged exposure to high intensity noise may cause
hearing loss.
4. Use safety equipment. A dust mask, non-skid safety
shoes and a hard hat must be used for the applicable
conditions. Wear a full face shield if you are producing
metal filings or wood chips.
5. Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or
long hair can be caught in moving parts.
6. Stay alert, watch what you are doing and use common
.
sense when operating a power tool. Do not use tool
while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating
the tool may cause serious injury.
7. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the tool
in unexpected situations.
8. Do not use on a ladder or unstable supports. Stable
footing on a solid surface enables better control of the
tool in unexpected situations.
9. Make sure the hose is free of obstructions or snags.
Entangled or snarled hoses can cause loss of balance
or footing and may become damaged, resulting in
possible injury.
Do not overreach. Keep proper footing and balance at all
10.
times. Proper footing and balance enables better control
of the tool in unexpected situations.
11. Do not attach the hose or tool to your body. Attach the
hose to the structure to reduce the risk of loss of balance
if the hose shifts.
3
Please contact 1-888-HD-HUSKY for further assistance.
HUSKYTOOLS.COM